Hades logoHades applet banner
Animated Elevator (2 of 5 floors)

applet icon

The image above shows a thumbnail of the interactive Java applet embedded into this page. Unfortunately, your browser is not Java-aware or Java is disabled in the browser preferences. To start the applet, please enable Java and reload this page. (You might have to restart the browser.)

Circuit Description

This applet demonstrates the 5 floor elevator controller, used as an example for state-machine design in many textbooks. To motivate and illustrate the elevator controller design, the applet contains a special simulation component that visualizes the elevator and its floor button. The FSM control only 2 floors in this example. Try to manage three up to five floors by using the state machine editor. Please, you have to add more inputs on FSM, and connect to elevator sensors and buttons.

Use the popup-menu ('edit') on the elevator component to open the window with the elevator visualization. Press any floor button and watch the behavior of the elevator controller. You can also open the state-machine editor to watch and edit the controller. The following image shows a screenshot of the applet with both the elevator animation and the state-machine editor open at the same time:

Elevator has five buttons, one on each floor. In addition, there are floor level sensors. When the elevator is on the ground floor, the ground sensor is ON. If the elevator moves up, the ground sensor is OFF, and the K level sensor will be switched ON when the elevator arrives on the K floor. The engine and direction are elevator inputs.

Inputs:

engine: ON and OFF

direction: move up (ON), move down (OFF)

Outputs:

Sensor: 5-bit vector, where the bit K will be ONE if the elevator is on K floor, otherwise OFF

Button: 5-bit vector, Switch the bitk ON if pressed, and stay ON until the elevator arrives at K floor.

Component written by André Bigonha, Ulisses Chippe, Giliardo Freitas and Ricardo Ferreira, DPI, Universidade Federal Vicosa, Brazil, cacau@dpi.ufv.br

To edit the state-machine, activate the popup-menu on the FSM symbol and select the edit menu item. This opens the editor window for the FSM, which uses a mode-oriented user-interface.

  • move-mode: Click-and-drag any one of the state symbols (circles) to a new location on the editor canvas. The currently selected state is highlighted in red. Use the textfield on the lower left to set the name of the selected state. To change the output values for Moore-type outputs in the selected state, first select that output in the list on the lower left and then select the new output-value (0 or 1) in the radio-button on the bottom.
  • state-mode: Click the mouse to create a new state and set its name and the default output values via the GUI controls on the lower left part of the editor window.
  • transition-mode: To create a new transition between states, first click of the initial state, then on the final state. Enter the logical condition that activates the transition in the textfield on the lower left, e.g. "*" for an always active transition, or "A&B" for a transition that is only active if the "A" and "B" inputs are both active (1).
  • comment-mode: Click the mouse to specify the position for a new text comment on the editor canvas; next enter the comment into the text-area in the lower left part of the editor window and finally press "apply" to create the comment.
  • delete-mode: Click the mouse to delete a state, transition, or comment.
  • starting state-mode: Click the mouse on a state symbol to select that state as the initial starting-state of the FSM.
  • Click the test FSM button to run a simple selftest that checks for each state whether transitions are active for any combination of inputs.
  • Use the load and save as operations to load or save the FSM design file.

Print version | Run this demo in the Hades editor (via Java WebStart)
Usage | FAQ | About | License | Feedback | Tutorial (PDF) | Referenzkarte (PDF, in German)
Impressum http://tams.informatik.uni-hamburg.de/applets/hades/webdemos/95-dpi/elevator5floors/floor2.html