Hades logoHades applet banner
Clock generator component

applet icon

The image above shows a thumbnail of the interactive Java applet embedded into this page. Unfortunately, your browser is not Java-aware or Java is disabled in the browser preferences. To start the applet, please enable Java and reload this page. (You might have to restart the browser.)

Circuit Description

This circuit demonstrates the clock generator component, class hades.models.io.ClockGen. The clock generator uses three user-settable timing parameters to specify the clock period (inverse of frequency), the duty-cycle (ratio of the 1-pulse to the clock period), and an initial offset before the generator starts.

The three clock generator components in this demonstration are all set to the same, rather slow clock period of 2 seconds, which corresponds to a clock frequency of 0.5 Hz. Due to the different settings of the initial offset, the clock generators start after 2 seconds, 4 seconds, and 6 seconds. Naturally, these values are uncommon large for electronic circuits and are only chosen for demonstration. Just open the property sheet of the clock generators (popup-menu, edit-component) and change the values as you like.

The duty-cycle parameter specifies the relative duration of the 1-output during each clock period. A value of 0.5 (50 percent) gives a symmetrical clock signal. See the annotation above for details.

Print version | Run this demo in the Hades editor (via Java WebStart)
Usage | FAQ | About | License | Feedback | Tutorial (PDF) | Referenzkarte (PDF, in German)
Impressum http://tams.informatik.uni-hamburg.de/applets/hades/webdemos/00-intro/05-switches/clockgen.html