Hades logo    Hades applet banner

TAMS / Java / Hades / applets (print version): contents | previous | next

NAND-chain hazards demo

NAND-chain hazards demo screenshot

Description

This circuit demonstrates that even a very simple circuit with a only a few gates can create a lot of hazards. Again, the gate delay of the individual gates is set to a very large value (0.5 seconds), in order to provide immediate visual feedback about the circuit operation. Just toggle the input value and watch the behaviour.

When the input line is switched to a zero value, all NAND gates generate a 1 output value (after one gate delay). As soon as the input line is switched to a high value, all gates see the logical 1 on their upper input from their predecessor, and the logical 1 from the input line. Therefore, all gates generate a logical 0 after one gate delay. Only the first NAND gate is now stable, while the remaining gates now have one input at zero, which implies that those gates switch back to one. This process repeats until the circuit finally stabilizes.

NAND chain waveform

Note that circuit structures like this should be avoided even if the rest of the system is designed to tolerate the hazards, because the high amount of switching also implies a lot of power consumption - at least for CMOS technology. In fact, the most advanced logic synthesis systems include the option to prefer low power consumption over low number of gates.

Challenge: Design a circuit that creates the maximum number of hazards per number of gates :-)

Run the applet | Run the editor (via Webstart)


Impressum | 24.11.06
http://tams-www.informatik.uni-hamburg.de/applets/hades/webdemos/12-gatedelay/30-hazards/nandchain_print.html